About Icons
Fire Extinguishers
for VehiclesABC Dry Chemical Fire Extinguisher
PEP-4V
PEP-10V
Features
Prepares for any eventuality, be it a passenger car or truck.
Comes with a bracket. Can be installed in any type of vehicles, from passenger cars to large trucks and buses! Please observe the safety standards laid out in the Road Transport Vehicle Act when installing.
- The bracket fixes the extinguisher securely in place, even inside moving vehicles
- The dedicated bracket that is included fixes the fire extinguisher securely in place, allowing it to be stowed in the vehicle without getting in the way, either inside or outside.
- Eco Mark product ideal for green purchasing!
- Aiming for zero emissions (zero waste), the Burstless™ (stored pressure type) [ECOSS-DRY] fire extinguisher eliminates the need for gas cartridges. This Eco Mark product is absolutely ideal for green purchasing.
- The Burstless™ fire extinguishers (stored pressure type) allow for easy routine inspections without the risk of rupture
- Instead of using a separate gas cartridge, the cylinder is filled with clean nitrogen gas to maintain uniform pressure at all times, and thus there will be no rupture. Also, routine inspections can be performed just by checking the pressure gauge.* All accidents involving ruptured fire extinguishers in the past 10 years have been attributed to cartridge-operated fire extinguishers. None have involved stored pressure type extinguishers. The Burstless™ fire extinguishers (stored pressure type) are designed for enhanced safety by preventing sudden increase in pressure during operation.
- EUQ mark adopted for new label
We have adopted the EUQ mark, which embodies our three considerations of “ECO,” “UD,” and “QUALITY,” as our label.- Safe even for cold climates
- By using stored pressure, we have expanded the operating temperature range to “-30°C to +40°C.” We recommend the extinguishers for use in vehicles in cold climates.
Specifications
Product Name | ABC Dry Chemical Fire Extinguisher | |||
---|---|---|---|---|
Model |
PEP-4V |
PEP-10V |
||
Standard | Approved by Japanese standard | |||
Approval No. | 23-105-1 | 24-5 | ||
Environmental Measures | ||||
Eco Mark | ● | ● | ||
Green Purchase Product | ● | ● | ||
Type II Environmental Label | − | − | ||
No PFOS | ● | ● | ||
Not Subject to PRTR | ● | ● | ||
Total Weight (with bracket) |
Approx. 4.3 kg (with bracket) |
Approx. 7.4 kg (with bracket) |
||
Total Height (with bracket) |
Approx. 440 mm (with bracket) |
Approx. 502 mm (with bracket) |
||
Total Width (with bracket) |
Approx. 200 mm (with bracket) |
Approx. 210 mm (with bracket) |
||
Depth (with bracket) |
Approx. 133 mm (with bracket) |
Approx. 157 mm (with bracket) |
||
Cylinder Diameter (WΦ) | 105 mm | 138 mm | ||
Extinguishing Agent Volume | 2.0 kg | 3.5 kg | ||
Cylinder Capacity | 2.35 L | 4.45 L | ||
Fire Rating (Japan) | A-2, B-3, C | A-3, B-7, C | ||
Discharge Time at 20°C (Approx.) | 13 sec | 16 sec | ||
Discharge Distance at 20°C | 3–6 m | 3–6 m | ||
Operating Temperature Range | -30°C to +40°C | |||
Anti-Rust/Corrosion-Resistant Treatment | Red synthetic resin paint baked coating | |||
Hose | Approx. 347 mm |
Approx. 320 mm |
||
Fill Pressure | N2 Gas 0.7–0.98 MPa | |||
Hydrostatic Test Pressure | 2.00 MPa | |||
Product Code | 92352000 | 92335000 |
* The above dimensions include the dedicated bracket.