1. Home >
  2. Fire Extinguishing Systems >
  3. Super Owl NSⅢ >
  4. Super Owl NSⅢ

Super Owl NSⅢ

Package Type Fire Extinguishing Equipment Type I

Super Owl NSIII (2012. 04. 01. released.)
The smallest and lightest in the industry. The pioneer of package type fire extinguishing equipment "Super Owl" can fully change the model to increase the convenience and operability. Super Owl can be an alternative solution to buildings which must have indoors hydrants installed. It is designed as all-in-one with all the necessary equipment inside the slim body. The required equipment for normal indoor fire hydrant such as water tank, pump, emergency power supply and piping are not needed. Therefore, it is comparatively economical and easy to install.
→ installation standards of package type fire extinguishing equipment is here.
※ Please contact us for details.

  • Super Owl NSⅢ

    Super Owl NSⅢ

  • with the door open

    (with the door open)

  • Filling kit

    (Filling kit)

  • The smallest and lightest product in the industry.

    The work efficiency of installation and transportation are improved.
    The strengthened solidity can avoid the distortion of the box and the door.
    <Height> 1,860mm → 1,350mm (500mm reduced)
    <Total mass> about 195kg → about 165kg (30kg lighter)

  • Equipped with industry No.1 lightest hose.

    Changed from synthetic rubber hose to resin rubber hose, reduced 72% of weight than conventional products.
    Easy to pull out the hose to the origin of fire.
    <Hose mass> 7.5kg → 2.1kg (5.4kg lighter)

  • Effortless and speedy filling with a dedicated tube.

    The "tube with dedicated cock" can directly be connected to the plastic container of extinguishing agents, whichsignificantly improved the working time and efficiency.
    With the lower box height, filling operation becomes easier.
    <Filling time of the fire extinguishing agents>15 minutes → 5 minutes (10 minutes shorter)

  • No.1 discharging distance in the industry.

    The improvement of the nozzle structure ensures the discharging distance up to 16m.
    <Increase the safety of firefighting operation>

  • SUS-made fire extinguishing agents storage container can provide excellent corrosion resistance

    No corrosion caused by fire extinguishing agents, no worries about the inner face paint peeling.

  • Option

    Sound bell transmitter option is available both for Floor Mount and Recessed type.

Item Floor Mount・
Floor Mount・
Sound Bell and Transmitter Option
Recessed・Lamp Recessed・
Sound Bell and
Transmitter Option
Product Model HSSW-825S3-RH HSSW-825S3-RS HSSW-825S3-UH HSSW-825S3-US
Approval Model Number HSSW-825S3
Approval Number PG-042
Product Category Package Fire Extinguishing System Type 1
Extinguishing Agent Category Water with wetting agent solution Type 3
Extinguishing Agent Approval Number 16~1
Installation Method Floor Mount (with Base) Wall Recessed
Pressurizing Cylinder / Pressurized Pressurizing Cylinder (with regulator)
Operating Method Turn Handle (on the pressurizing cylinder)
Total Weight Approx. 165㎏
Extinguishing Agent Weight 80.4L (Approx. 102㎏)
Operating Temperature Range -20℃~40℃
Function Discharge Time 180 s
Discharge Distance Approx 16.0m
Discharge Flow Rate 27.0L/min
Box Dimensions 750mm(W)×1350mm(H)×
Dimensions of Recessed Part - 770mm(W)×1285mm(H)×
Available Adjustment from frame to Body - Max 25mm
Material SPCC
Color Light Gray
Door Type Fully opening hinged door (opens to the right)
Extinguishing Agent Cylinder Internal Volume 82L(41L×2)
Material SUS304
Anti-Corrosion Uses Corrosion resistant Material
Test Pressure 1.60MPa
Quantity 2
Pressurizing Cylinder Cylinder Valve Model Number 59~1  or  176
Internal Volume 3.4L
Coating Gray
Gas Nitrogen
Gas Amount 565g(20℃)
Hydrostatic Test Pressure / Leak Test Pressure 24.5/14.7MPa
Max Fill Pressure 14.7MPa
Safety Valve Actuation Pressure 16.7~19.6MPa
Quantity 1
Hose Dimensions φ17.0mm(O.D.)×φ13.0mm(I.D.)×25m
Material (Outer) Polyester Fiber Weave /(Inner) Polyurethane Resin
Test Pressure 1.5MPa
Storage Style Hose Rack
Valve Nozzle Open / Close Valve Ball Valve ( Size: Rc1/2)
Nozzle Orifice φ6mm
Material C3771B
Anti-Corrosion Cr Plating
Regulator Regulator Pressure (Fixed) 0.9±0.05 Mpa
Material C3604B
Piping For Pressure Material Nylon
Size φ6mm×2
For Liquid Material ABS
Size φ10mm
Other Valve for Maintenance Ball Valve (Size: Rc1/4)
Check Valve 1 Unit (Pressure Entry Part)
Sound Bell and Transmitter Option Our specified
transmitter and
sound bell can be
built in
Our specified
transmitter and
sound bell can be
built in

※ We also accept order production of super Owl NSⅡ.

  • CABINEX Series
  • ECOSS pure water
  • Replacement Parts for CABINEX

▲ top of page