1. Home >
  2. Fire Extinguishers >
  3. pure water >
  4. pure water

pure water

  • PWE-3S

    pure water

  • Complience with PRTR

    Does not contain materials listed in PRTR codes.

  • Avoids Secondary Disaster afer Use

    Pure water, does not contain chloride.
    Can be used safely in clean rooms and computer rooms.

  • For Class A and Class C Fires

    Suitable for use on class A and class C fires.
    The electrical conductivity of pure water is less than 10 μS/cm. That is about 1/20th the value of potable water.

  • Safe and Environmentally Friendly

    Based on pure water there is no chloride and the pH is neutral making it safe to use and environmentally friendly.

  • Recommended for the following Locations:

    Clean rooms, computer rooms, server rooms, data centers, precision machining factories.

Pure Water Fire Extinguisher
ModelPWE-3S (Pressurized Type)
SpecificationAuthority's approval
(Products to be approved by Ministry of Public Management)
Approval No.Fire Dept.No.23~188
Whole Weight (Approx.)About 5.2kg
Whole Height (Approx.)About 491mm
Total Width (Approx.)About 225mm.
DepthAbout 142mm
Volume of Chemical AgentAgent for Pure Water 3.0L
Unit of ability for extinguishing fireA-1・C
Discharging time(+20℃)About 21 seconds
Discharging distance(+20℃)4~7m
Temperature to used0℃~+40℃
Rust roof anticorrosion treatmentRust proof treatment is not made due to
anticorrosion material
HoseAbout 357mm
Pressure of filling powder0.70~0.98MPa
Value at pressure test1.60MPa
Unit of packing / delivery1
Product Code96151000
  • CALUMIE
  • CABINEX Series
  • Argonite Amulay 30
  • ECOSS pure water
  • SUPER OWL
  • METAX
  • Replacement Parts for CABINEX

▲ top of page