1. Home >
  2. Extinguishing Systems for Manufacturing Equipment >
  3. CABINEX Series >
  4. CABINEX-EWT

CABINEX-EWT

  • CABINEX-EWT

    CABINEX-EWT

  • 【FM Approved】

    FM approved Fire Extinguishing Systems for FPD, SEMI user.

  • Compact and Slim

    The dimensions of the extinguishing system are approximately 25% more compact them previous models.

  • LCD display on Control Panel

    The control panel includes addressable points and history functions as standard. On LCD display, you can check the time of a detector’s alarm, a fault situation, and which detector aclivated.

  • CO2 for clean efficient extinguishing

    Hatsuta's CO2 DESING FOR CABINEX-EWT is based on FM approval. CO2 is non-conductive and clean. After discharging CO2, there is little bad influence on the clean room environment and the protected equipment.

  • After Care and Service

    Periodical maintenance is highly reccomended for safe use.Hatsuta’s service network will provide users with the necessary after care and speedy service needed.

  • High Quality, High Performance

    roduced in an ISO9001 certified facility, the Cabinex-EWT meets the global standards for quality as well as the appropriate parts of the following regulations:

CABINEX-EWT
Model No. COX-50EWT COX-100EWT COX-100EWT-W
Applovals FM Approved
Extinguishing Agent CO2
Extinguishing Agent Weight

22.7kg(50LB)

45.4kg(100LB)

45.4kg(100LB)
Dimentions
( H×W×D ) mm
1,530×500×370 1,980×550×400 1,980×850×400
Color Red
Total Weight ( Approx.) 170kg 270kg 400kg
Operating Temperature 0~40℃
Input Voltage A℃ 100-120/187-240V、50/60Hz
Power 105W max
Control Circuit Voltage DC24V
INPUT/OUTPUT
Battery Input 12V DC Battery ×2
SI Module Input 1line
Manual Stations Input 1line
Discharge Module Input 1line
Relay Module Input 1line
Actuator Output DC24V / 1.0A Max.
Horn & Strobe Output DC24V / 0.5A Max.
Output Voltage DC24V / 1.5A Max.
Fire Alarm Relay DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.
Pre-Discharge Relay DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.
Fault Alarm Relay DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.
FUNCTION
Discharge Delay Timer 0, 5, 10, 20, 30, 60 Second Selectable
Number of Zones 2 ( AND / OR Selectable )
Detector Address Maximum 32 Point
History Record Max.100
Alarm Silence Push “Alarm Silence” to Silence
Alarm Buzzer Fire Alarm: Continuous Trouble Alarm: Intermittent
Manual Release Push “Discharge Button” to Discharge
LED/SW
AC OK LED Green ( Off at AC Power Down )
Pre Discharge LED Red ( Flashes when in discharge pending. Off when Discharge )
Discharge LED Red ( On when Discharge Activates )
Zone 1 Fire LED Red ( Flashes when zone 1 alarm )
Zone 2 Fire LED Red ( Flashes when zone 1 alarm )
Manual Release LED Red ( Flashes when Manual release Activates )
Fault LED Yellow ( Flashes when fault )
Discharge Disabled LED Yellow ( flashes discharge disabled activates )
Alarm Silenced LED Yellow ( Flashes when alarm silenced )
Discharge Switch Red push button ( Outside the control panel )
AC Power Switch White toggle switches
Enter Switch White push button ( for address checking )
Scroll Switch White push button ( for address checking )
Reset Switch White push button ( for address checking )
Silence Switch White push button
  • CALUMIE
  • CABINEX Series
  • Argonite Amulay 30
  • ECOSS pure water
  • SUPER OWL
  • METAX
  • Replacement Parts for CABINEX

▲ top of page